登录
注册
产品详情：
ThingMagic Sargas 读写器是一个高性能、支持2 Port 天线接口的超高频读写器；内嵌ThingMagic M6e-Micro读写模组、配置合适的天线；读取设备实现大于750标签/每秒的读取速度和超过9米的读取距离；基于1 GHz的ARM Cortex A8处理器上运行的Linux内核版本3.8。支持DDR内存为512字节和可移动4 GB闪存存储；通过Mercury OS C API操作系统支持板载应用程序，MercuryOS 增加包括基于Web的配置和使用HTTP/ HTTPS和SSL / SSH- ASED安全监控；网络功能包括TCP/ IP协议栈以及Cisco认证的DHCP＆DNSbased配置和固件。
Sargas 超高频RFID读写器（ThingMagic） 简介：
对于企业，商业和工业环境，高性能和紧凑的形式因素在广泛的经营条件是必需的。
ThingMagic?Sargas 读写器是一个高性能、支持2 Port 天线接口的超高频读写器。
ThingMagic?Sargas 读写器内嵌ThingMagic M6e-Micro读写模组、配置合适的天线。读取设备实现大于750标签/每秒的读取速度和超过9米的读取距离。
ThingMagic?Sargas 读写器是基于1 GHz的ARM Cortex A8处理器上运行的Linux内核版本3.8。支持DDR内存为512字节和可移动4 GB闪存存储。
ThingMagic?Sargas 读写器通过Mercury OS C API操作系统支持板载应用程序，MercuryOS 增加包括基于Web的配置和使用HTTP/ HTTPS和SSL / SSH- ASED安全监控。
ThingMagic?Sargas 读写器的网络功能包括TCP/ IP协议栈以及Cisco认证的DHCP＆DNSbased配置和固件。
硬件特性
ThingMagic?Sargas 读写器有广泛的硬件输入/输出的功能。除了以太网，2个USB（一个主机，一个客户端），和4个光电隔离通用输入/输出（GPIO）端口，和一个HDMI端口。一个RFID集成显示系统通常包括增加一个独立的PC能够利用标准外设或添加自定义显示，而ThingMagic?Sargas 读写器内置一个HDMI接口，可以支持一个标准的显示器或监视器直接连接，减少硬件数量和开发时间。
主要特点
读取速率高达每秒750标签
全球标准的频率覆盖
网络，GPIO，USB、Micro-SD端口
独特的板载HDMI接口
Mercury API，通用读写器Assistant软件支持
独立读写射频控制
Thingmagic Sargas reader is a high-performance UHF reader and writer supporting 2 port antenna interface; thingmagic M6E micro reader and writer module is embedded, and appropriate antenna is configured; reading device realizes reading speed greater than 750 tags / second and reading distance greater than 9 meters; Linux kernel version 3.8 running on ARM cortex A8 processor based on 1 GHz. It supports 512 bytes DDR memory and 4 GB removable flash storage; supports onboard applications through the mercury OS C API operating system, and adds web-based configuration and security monitoring using HTTP / HTTPS and SSL / ssh-seed; network functions include TCP / IP protocol stack and Cisco Certified DHCP & dnsbased configuration and firmware.
About Sargas UHF RFID reader (thingmagic):
For business, commercial and industrial environments, high performance and compact form factors are necessary in a wide range of operating conditions.
Thingmagic? Sargas reader is a high-performance UHF reader with 2 port antenna interface.
Thingmagic? Sargas reader is embedded with thingmagic M6E micro read-write module and equipped with appropriate antenna. The reading device achieves a reading speed of more than 750 tags / second and a reading distance of more than 9 meters.
Thingmagic? Sargas reader is based on Linux kernel version 3.8 running on the 1 GHz arm cortex A8 processor. It supports 512 bytes DDR memory and 4 GB removable flash memory.
Thingmagic? Sargas reader and writer support on-board applications through the mercury OS C API operating system. Mercuryos addition includes web-based configuration and use of HTTP / HTTPS and SSL / ssh-seed security monitoring.
The network functions of thingmagic? Sargas reader writer include TCP / IP stack and Cisco Certified DHCP & dnsbased configuration and firmware.
Hardware characteristics
Thingmagic? Sargas readers have a wide range of hardware input / output functions. In addition to Ethernet, 2 USB (one host, one client), and 4 photoelectric isolated general purpose input / output (GPIO) ports, and one HDMI port. An RFID integrated display system usually includes adding an independent PC that can use standard peripherals or add custom displays, while thingmatic? Sargas reader writer has an HDMI interface built in, which can support a standard display or monitor direct connection, reducing the number of hardware and development time.
main features
Read rate up to 750 tags per second
Frequency coverage of global standards
Network, GPIO, USB, micro SD port
Unique onboard HDMI interface
Mercury API, general reader assistant software support
Independent read write RF control